How Earnouts Work, and Where the SBA Draws the Line
A seller says the business is worth $12 million. The buyer sees $9.6 million. Nobody is lying. One is pricing next year. The other is pricing last year.
An earnout is how deals close across that gap. Part of the price is paid at closing. The rest is paid later, and only if the business hits targets both sides agreed to in writing.
It sounds simple. It is not. Most earnout fights come from three places: the metric, the measurement and who controls the business while the clock runs. And on an SBA 7(a) loan, an earnout is not allowed at all.
This guide is written for the buyer.
Why earnouts matter now
Under SBA SOP 50 10 8.1, effective October 1, 2026, seller earnouts are prohibited in 7(a) change of ownership deals. The rule sits in Appendix 15 of SBA SOP 50 10. Buyer rebates based on business performance are allowed, because they benefit the borrower. Any rebate the buyer receives must go to pay down the principal of the 7(a) loan that funded the purchase.
That matters because the standard 7(a) loan tops out at $5,000,000, per the same SOP. The SBA says change of ownership deals have grown to be among the largest categories of 7(a) lending. For those deals the earnout is off the table, and buyers need another tool.
Money also costs more than it did in the easy years. The bank prime loan rate stood at 7.00% in the Federal Reserve's H.15 release for November 13, 2026. When acquisition debt is priced off prime at that level, every dollar paid at closing has to be carried by cash flow from day one. A deferred, contingent payment moves some of that load to the years when the business has proven itself under new ownership.
How an earnout is built
Every earnout has five parts. Miss one and you are writing a dispute, not a deal.
- The metric. Revenue, gross profit or EBITDA. Revenue is easy to measure and hard to manipulate, but it ignores margin. EBITDA tracks what you paid for, but the buyer controls the expenses after closing, so sellers distrust it.
- The target. Usually set at or above the trailing twelve months. A target below current performance is a price increase dressed up as an incentive.
- The period. Usually a short run of years, measured year by year. A longer period gives both sides more time to disagree.
- The payout curve. All or nothing, or a sliding scale between a floor and a target. A sliding scale removes the cliff that makes a seller fight over the last dollar.
- The cap. The most the earnout can ever pay. Without one, the buyer has written an open check.
Then write the rules of measurement. Name the accounting method, which add backs count, how a later add on acquisition is treated, and who prepares the yearly statement. Name an independent accountant to settle disputes. Put a deadline on each step.
If the earnout is paid on adjusted earnings, start from the same normalized number the deal was priced on. A quality of earnings report gives both sides that baseline in writing.
Where earnouts go wrong
The most common failure is control. After closing, the buyer runs the business. The seller's money now depends on decisions the seller no longer makes. If the buyer raises prices, adds overhead or folds the company into another one, the seller will claim the earnout was starved.
Buyers protect themselves by agreeing up front on what they will and will not do during the earnout period. Keeping separate books for the acquired business is the simplest version.
The second failure is the wrong metric. A buyer who pays on revenue can end up paying for sales that lost money. A seller paid on EBITDA worries the buyer will load costs onto the business. Gross profit often sits between the two.
The third is tax treatment. Whether payments to a seller who stays on are treated as purchase price or as pay changes how both sides are taxed. That is a question for your CPA and deal counsel before the letter of intent, not after.
What to use when the SBA rules out an earnout
On an SBA deal, the usual substitute is a seller note. Under Appendix 15, seller debt that is subordinated to the lender and on full standby, meaning no payments of principal or interest for the term of the 7(a) loan, may count as equity.
There are limits. For an initial acquisition, the minimum equity injection is 10% and cannot be reduced. The SOP lists standby and seller debt among the limited equity sources, which together may provide no more than half of that required injection. A seller note that has been in place and current, not on standby, for at least 36 months can become eligible to be refinanced.
If the agreed price is higher than what the business valuation and quality of earnings report support, the extra funds must also be on full standby. That is the SBA's version of bridging a price gap. The seller waits instead of getting paid on performance.
The lender still has to see the business carry its debt. For an initial acquisition, the debt service coverage minimum is 1.25:1, measured on the last fiscal year or the average of the last two. When the deal requires a quality of earnings report, the lender must use its findings to calculate that coverage. Our guide to seller financing for business acquisitions walks through how that note is structured.
The other tool is the buyer rebate. The price is set at the seller's number, and the seller refunds part of it if the business misses agreed targets. Because any rebate goes to the 7(a) principal, it lowers the buyer's debt rather than putting cash in the buyer's pocket.
When no 7(a) loan funds the purchase, private equity funds, family offices, independent sponsors and conventional lenders set the terms, and earnouts come back into play. They test earnings through a quality of earnings report that normalizes EBITDA and ties it to bank deposits, then set the fixed closing price on that normalized number. The earnout carries the rest.
A worked example, illustrative
Illustrative only. This is not a real deal and not a prediction of any outcome.
A buyer is acquiring a services company with $8 million in revenue and $2.4 million in verified EBITDA, a 30% margin. The seller wants $12 million, or 5.0x EBITDA, based on growth they expect. The buyer will pay 4.0x on proven earnings at closing. The buyer is financing the purchase without an SBA 7(a) loan, so an earnout is allowed.
- Closing payment: $2.4 million times 4.0 equals $9.6 million.
- Earnout cap: $12 million minus $9.6 million equals $2.4 million, split into two yearly payments of up to $1.2 million each.
- Payout curve: nothing if yearly EBITDA is $2.4 million or less. The full $1.2 million at $2.6 million or more. Pro rata in between, so each $10,000 of EBITDA above $2.4 million earns $60,000 of earnout ($1.2 million divided by the $200,000 range).
Year one EBITDA comes in at $2.5 million. That is $100,000 above the floor, half of the $200,000 range. The payment is $600,000.
Year two EBITDA comes in at $2.7 million, above the target. The payment is the full $1.2 million.
Total paid: $9.6 million plus $600,000 plus $1.2 million equals $11.4 million. That is 4.75x the $2.4 million of EBITDA the buyer verified before closing, and 95% of the seller's $12 million ask. The buyer paid the higher multiple only after the business earned it.
Had both years come in at $2.4 million or less, the buyer would have paid $9.6 million and nothing more.
Frequently asked questions
How long does an earnout usually last?
There is no SBA or legal standard, because SBA loans do not allow them. On conventional and sponsor deals the length is negotiated, often a few years measured one year at a time. Shorter periods leave less room for the business to change under the new owner, which means fewer disputes about who caused a miss.
Can you use an earnout with an SBA loan?
No. SBA SOP 50 10 8.1 prohibits seller earnouts in 7(a) change of ownership deals. Buyer rebates tied to performance are allowed, and the rebate must pay down the 7(a) loan principal.
What happens to an earnout if the buyer sells the business?
It depends on the contract. Many purchase agreements say the remaining earnout is paid in full, or at a set amount, if the buyer sells or merges the business before the period ends. Write that clause in before closing.
Is an earnout better than seller financing?
They solve different problems. A seller note defers a fixed price. An earnout makes part of the price depend on results. On SBA deals the choice is made for you, because earnouts are prohibited. A seller note is allowed, and only a note on full standby can count toward the equity injection.
How FM structures the gap
Fadi has owned companies since 1999. The pattern on deal terms holds: price what you can verify, and put the rest on terms both sides can measure.
FM buys businesses with $3 million to $15 million in revenue and 30% or better margins. The other criteria are three or more years of profitable history a third party can verify, a controlling stake, operations in the United States and no customer above 25% of revenue. The full box is on what I buy.
If your business is under $3 million in revenue or under a 30% margin, start with fractional C suite advisory and build toward the box first.
Owners thinking about a sale can see how FM approaches deals and send an opportunity through deal flow. Buyers working through structure can read how FM thinks about capital and lending, review business strategy for acquisitions, and join the buyer cohort to work deals with other buyers.
This communication is for informational purposes only and does not constitute an offer to sell or a solicitation of an offer to buy any securities, financial instruments, or investment products. FM Enterprises is not a licensed business broker, a registered broker-dealer, an investment advisor, or a financial planner, and does not place outside capital. Any discussions regarding business strategy, scalability, or introductions are strictly for educational and strategic purposes. Please consult with a licensed financial or legal professional before making any investment or financial decisions.
Thinking about buying a business? See where you stand before you make an offer.
Take the acquisitions quiz